Ashori, A.

Advanced Materials Research 123-125: 1195–1198.


In this study, the effect of wood fiber concentrations on the mechanical properties of composites, prepared by using MAPP as the coupling agent, was investigated. In the sample preparation, four levels of fiber loading and three compounding temperatures were used. Most major changes in composite performance occurred at fiber contents above 30 wt%.The results clearly showed that the fiber loading of 30 and 40 wt% at 190oC was provided adequate reinforcement to increase the tensile and flexural strength of the PP powder. The modulus also increased with increasing the fiber content, because poplar fibers are believed to be more rigid than polymer. However, the addition of wood fibers resulted in a decrease in elongation and impact properties of the composites.

Iranian Research Organization for Science and Technology
Department of Chemical Technologies
Last updated on Dec - 10 2023
All rights reserved by IROST 1980-2023